Was this page helpful?

light detector - il brutto
light detector - il bruttoEdit

    Sommaire
    aucun titre

    INFO

    Name / nom light detector - il brutto
    Absorber / absorbeur

    Ge wafer - 10 mm x 10 mm - h 300 µm

    Thermistor

    around 5 mg

    Bonding

    NTD: gold wire - 25 µm

    Supports/ supports teflon supports
    Holder Cu
    Notes

    pin (no kapton)

    ozidized Ge surface
    previously used with ZnSe crystal

       

     

    PHOTO

    ilBruttoedilCattivo.png

    CHARACTERIZATION / CARACTERISATION

    1 - Ulisse cryostat - RUN19 - gen 2016

    semi-vintage electronic

    Source / sources

    55Fe

    Optic fiber: Agilent HFBR 820nm - datasheet attached

       

     

    IMG_20160120_171156d.jpg

     

    M1

    DR=+-5        gain=1403        fs=20kHz        bessel = 675 Hz

    I bias = 12.5 nA

    R = 224 kohm

     

    M2, M3, M4

    DR=+-1V        gain=1403        fs=20kHz        bessel = 675 Hz

    I bias = 12.5 nA

     

    M9, M10

    DR=+-1V        gain=1403        fs=20kHz        bessel = 675 Hz

    I bias = 4.16 nA

      M1 M2 M9 M10 M3 M4
    Sensibility [nV/keV] 247 (µ) 184.6 266 273 181 193
    Sigma 55Fe [keV] no 55Fe too noisy - - - - -
    Sigma baseline [eV] no 55Fe too noisy 443 433 441 501 428
    Was this page helpful?
    Mots clés (Modifier les mots clés)
    • No tags
    Vous devez être connecté pour poster un commentaire.
    Propulsé par MindTouch Core