Was this page helpful?

NTD thermistors
NTD thermistorsEdit

    Sommaire
    aucun titre

    NTD thermistors

    The NTD's ID contains identification of its type (average size) and index number. In general, we distinguish NTDs in following way:

    type "a" - T shaped NTD (with lateral contact pads);

    type "b" - NTD (2.2x0.8mm) [NTD type "d" cut on 3 samples];

    type "c" - NTD (2.2x1.3mm) [NTD type "d" cut on 2 samples];

    type "d" - NTD (2.2x3mm) with lateral or frontal (FlatPack - FP) or combined (WrappedAround - WA) contact pads;

    type "e" - NTD (3x0.8mm) [NTD type "f" cut on 2 samples];

    type "f" - NTD (3x3mm) with lateral or frontal (FlatPack - FP) or combined (WrappedAround - WA) contact pads.

    ID

    size (mm)

    mass (mg)

    batch

    R0(ohm)

    T0(K)

    rho(ohm*mm)

    note

    detector

    type "a"

     

     

     

     

     

     

     

     

    a#1

    3x1.0x0.6

    ≈10

     

     

     

     

    T shaped

    LD#1

    a#2

    3x1.0x0.6

    ≈10

     

     

     

     

    T shaped

    LD#2

    a#3

     

     

     

     

     

     

    T shaped

    ZMO 5g

    a#4

     

     

     

    6.24

    3.11

     

    T shaped

    CdS

     

     

     

     

     

     

     

     

     

    type "b"

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    ID b#1 is free

     

     

     

     

     

     

     

     

    ID b#2 is free

     

    b#3

    2.2x0.8x0.6

     

     

     

     

     

     

    prebolo325

    b#4

    2.2x0.8x0.6

    ≈5

    34B

     

     

     

     

    prebolo326

    b#5

    2.2x0.8x0.6

    5.6

    34B

     

     

     

    FP

    LUM10

    b#6

    2.2x0.8x0.6

    4.6

    34B

     

     

     

    FP

    LUM11

    b#7

    2.2x0.8x0.6

    4.5

    34B

     

     

     

    FP

    LUM12

    b#8

    2.2x0.8x0.6

    5.2

    34B

     

     

     

    FP

    GeCo1
    (LUM14)

    b#9

    2.2x0.8x0.6

    ≈5

     

     

     

     

     

    SiLuke-1
    SID

    b#10

    2.2x0.8x0.6

    ≈5

     

     

     

     

    FP

    GeCo2

    b#11

    2.2x0.8x0.6

    ≈5

     

     

     

     

    WA

    GeCo3-bis

    b#12

    2.2x0.8x0.6

    ≈5

     

     

     

     

    FP

    Luke-2

     

     

     

     

     

     

     

     

     

    type "c"

     

     

     

     

     

     

     

     

    c#1

    2.2x1.3x0.6

    8.3

     

     

     

     

     

    M2 (LT12)

    c#2

    2.2x1.3x0.6

    9.4

     

     

     

     

     

    M3 (LT13)

     

     

     

     

     

     

     

     

     

    type "d"

     

     

     

     

     

     

     

     

    d#1

    2.2x3x0.6

    19.5

     

    1.33

    3.83

     

     

    LT1

    d#2

    2.2x3x0.6

    19.5

     

     

     

     

     

    LT2

    d#3

    2.2x3x0.6

     

     

     

     

     

     

    LT7

    d#4

    2.2x3x0.6

     

     

     

     

     

    it was cut ⇒ b#5,6,7

    LT8

    d#5

    2.2x3x0.6

     

     

     

     

     

     

    LT9

    d#6

    2.2x3x0.6

     

     

     

     

     

     

    LT10

    d#7

    2.2x3x0.6

    ≈20

     

    1.33

    3.83

     

     

    M1 (LT11)

    d#8

    2.2x3x0.6

     

     

    1.33

    3.83

     

     

    Luke0

    d#9

     

     

     

    1.33

    3.83

     

     

    ZM24

    d#10

     

     

     

     

     

     

     

    Lumineu small

    d#11

     

     

     

     

     

     

     

    Lumineu big

    d#12

    2.2x3x0.6

     

     

     

     

     

    FP

    Luke-3

     

     

     

     

     

     

     

     

     

    type "e"

     

     

     

     

     

     

     

     

    e#1

     

     

    34C

     

     

     

    WA

    ready to be used

    e#2

     

     

    34C

     

     

     

    WA

    ready to be used

    e#3

     

     

    34C

     

     

     

    WA

    ready to be used

    e#4-9

     

     

    34C

     

     

     

    WA
    to be cut from 2 NTDs

    ready to be used soon

     

     

     

     

     

     

     

     

     

    type "f"

     

     

     

     

     

     

     

     

    f#1

     

     

     

     

     

     

     

    Luke-1

    f#2

    3x3x1

     

    34B

     

    3.83

    1.09

    f#2 or f#3 is absent

    ZM313 (now CdWO)

    f#3

    3x3x1

     

    39C

     

    4.2

    1.03

    f#2 or f#3 is absent

    ZM313 (now CdWO)

    f#4

     

     

     

     

     

     

    WA; HR1 (radioactive)

    ZM501

    f#5

     

     

     

     

     

     

    WA; HR2

    ZM501

    f#6

     

     

     

     

     

     

    WA; HR3

    ZM502

    f#7

     

     

     

     

     

     

    WA; LR1

    ZM502

    f#8

     

     

     

     

     

     

    WA; LR2

    ZM503 (top), ZM???

    f#9

     

     

     

     

     

     

    WA; LR3

    ZM503 (bottom), LM???

    f#10

     

     

    34B

     

     

     

    Q34B-80

    ZMO pure

    f#11

     

     

    34C

     

     

     

    WA; Q34C_?_D

    ZM W-doped

    f#12

     

     

     

     

     

     

    WA

    LMO-big

    f#13

     

     

    34C

     

     

     

    WA; radioactive

    LMO-FRA

    f#14

     

     

     

     

     

     

     

    LMO half pear

    f#15-18

     

     

    39C

     

     

     

    4 new NTDs
    2.96x2.86x0.93
    2.97x2.85x0.93
    2.97x2.86x0.93
    2.95x2.86x0.93

    ready to be used

    Was this page helpful?
    Mots clés (Modifier les mots clés)
    • No tags
    Vous devez être connecté pour poster un commentaire.
    Propulsé par MindTouch Core